Guides.
What we’ve learned designing, printing and loading 3D-printed case inserts, written down as we go. Start with printing if your STL is ready. The rest are builds we’ve actually done, with photos of the result (and the odd energy drink).

Printing
How to 3D print a case insert
Every insert we support is wider than a 256 mm build plate, so most of this is about splitting it well. PETG or ASA, plug connectors, settings for Bambu Studio, PrusaSlicer, OrcaSlicer and Cura, and a test section before you commit filament to the whole thing.

Airsoft
A 3D-printed case insert for your airsoft pistol
Licensed airsoft replicas are built to the real pistol’s size, so they fit real-steel gear profiles as they are. An Umarex VFC Glock 19 Gen 5 and its gas magazine in a Pelican 1170 (or MEIJIA MJ1170) insert. No sanding, no trimming, and room left for a drink.

AI coding agents
Customize a 3D-printed insert with an AI coding agent
Hand an AI coding agent a downloaded STL and a few measurements, and it will cut a custom cavity and check the insert still prints. We used Codex: about 40 minutes, two depths and one honest warning about wall thickness. Claude Code can take the same steps.
