About StashGrid.

StashGrid is a free browser designer for 3D-printable hard-case inserts. You pick a supported case and lay out your pistol, magazines and accessories on a model of it. Then you download an STL and print it at home. It is free while it is in beta.

By the StashGrid team · ·

The team

Two people make StashGrid: one prints the inserts, writes the printing instructions and models the gear, the other builds the designer and the site.

Andrew Liyanage aiming a rifle with a red-dot sight and magnifier at an indoor range, wearing hearing protection and shooting glasses

Andrew Liyanage

Printing, gear models and printing instructions

Andrew is a Swiss-based Business Solution Engineer with an IT background and a passion for shooting, 3D design and making things. Outside of work, he’s a self-confessed gear nerd who loves designing and 3D-printing practical solutions. He’s particularly interested in the intersection of technology, craftsmanship and the shooting community — always looking for a smarter way to build, modify or improve things.

Noel Tock in a cap and plate carrier beside a humanitarian aid van painted with dogs, a soldier in camouflage behind him

Noel Tock

The designer and the site

Noel is originally from Switzerland and splits his time between open-source software and frontline aid. He co-founded the enterprise WordPress company where he still works. Since 2023 he has been in and out of Kharkiv, Ukraine, running frontline evacuations as a volunteer. He also co-founded a foundation that backs several direct-action charities.

The feedback button in the designer reaches both of us; tell us which case you own and it goes on the list.

The facts

Written to be lifted whole. If something here is wrong, it is wrong everywhere else on the site too, and the feedback button in the designer reaches us.

What it isA web application at stashgrid.io that designs replacement inserts for hard cases and exports them as STL files for 3D printing.
What it costsNothing during the beta. Designing needs no account; downloading the STL needs a free one.
What you getOne binary STL per insert layer, in millimetres, at the real size of the case interior. No subscription, no watermark, no file limit.
Supported cases3 case profiles, listed below, plus the MEIJIA MJ1170 on the Pelican 1170 profile.
Gear library14 Glock pistol models, 13 lights, optics, magazines and small parts, and 2 utility shapes. All Glock-family today.
Surface finishes4: Smooth, Diamond In, Diamond Out, Wildlands.
Wall clearance5 mm between every pocket and the case wall, enforced by the designer.
PrintingPLA or PETG, 3 wall loops, ironed top surface. Every supported insert is wider than a 256 mm build plate and prints in two or more pieces joined with plug connectors. Instructions.
SinceDecember 2025.
A 3D-printed red insert in a Glock factory case holding a Glock 19 with a red-dot optic and a Surefire light, two magazines with red basepads, and a spare part
A printed insert in the Glock factory case, designed in StashGrid and printed in PETG.

What it supports

Support is per case model, not per brand. Each profile is the real interior of that case, so the insert follows its outline rather than a generic rectangle.

CaseInsert (width × height × depth)Example layout
Apache 3800Lower: 376 × 266 × 53 mm; Upper: 379 × 269 × 53 mm
Glock Factory Case266 × 222 × 26 mm
Pelican 1170270 × 155 × 53 mm
MEIJIA MJ1170 (same insert as the Pelican 1170)270 × 155 × 53 mm

Gear is Glock pistols and what mounts on them: Surefire and Streamlight weapon lights, Trijicon and Holosun optics, a compensator, a magwell, basepads, 17- and 19-round magazines, a speedloader. Other brands are the most requested addition and are not in the library yet.

What it is not

  • Not foam. The insert is rigid printed plastic. Code names in the software still say foam; the output never was.
  • Not universal. A profile for the Pelican 1170 says nothing about the 1150, 1200 or 1400. A look-alike case is supported only when we have checked it, which so far means the MEIJIA MJ1170.
  • Not scalable. Scaling the STL shrinks the pockets with it and the gear stops fitting. Split a large insert instead.

Why it exists

Pick-and-pluck foam falls apart, custom foam takes weeks, and designing an insert in CAD is an evening with calipers before anything prints. Plenty of gun owners already own a printer. What was missing was the step from “this case, this pistol, these magazines” to a file, without the modelling.

So StashGrid starts from models of the case and the gear rather than photos and measurements. That makes it fast for what it supports and useless for what it does not, which is why the case list is short and grows slowly.

Plan the layout before you print.

Design your insert