Apache 3800
Two separately editable inserts. Switch between Upper and Lower to arrange each layer and export its own STL.
| Insert | Width × length × depth |
|---|---|
| Lower | 376 × 266 × 53 mm |
| Upper | 379 × 269 × 53 mm |
Find your case.
Start with a supported case profile, arrange gear from the library, and export a custom insert for your own printer. These are digital insert models, not cases or finished prints for sale.
Glock Factory Case
A single insert model with an editable gear layout and STL export.
| Insert | Width × length × depth |
|---|---|
| Base Layer | 266 × 222 × 26 mm |
Pelican 1170
A single insert model with an editable gear layout and STL export.
| Insert | Width × length × depth |
|---|---|
| Base Layer | 271 × 156 × 53 mm |
Check the exact model before you start
Support for one case does not imply support for other models from the same brand. The library uses known gear profiles; it does not turn an uploaded photograph into a cutout. Check the available variants in the designer before planning your layout.
The measurements above describe the insert geometry. Physical fit depends on the case, material, printer calibration, and the finished print. Print validation is still in progress; these dimensions are not a fit certification.